OS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfd99000 (usable) [ 0.000000] BIOS-e820: 00000000cfd99000 - 00000000cfda6000 (reserved) [ 0.000000] BIOS-e820: 00000000cfda6000 - 00000000cfe3c000 (usable) [ 0.000000] BIOS-e820: 00000000cfe3c000 - 00000000cfe96000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfe96000 - 00000000cfe9b000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe9b000 - 00000000cfe9c000 (usable) [ 0.000000] BIOS-e820: 00000000cfe9c000 - 00000000cfef2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfef2000 - 00000000cfeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable) [ 0.000000] 3904MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fe200 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Entering add_active_range(0, 0, 1228800) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1228800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1228800 [ 0.000000] On node 0 totalpages: 1228800 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7808 pages used for memmap [ 0.000000] HighMem zone: 991616 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT CFEFD038, 0050 (r1 INTEL DG965SS 6B7 1000013) [ 0.000000] ACPI: FACP CFEFC000, 0074 (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: DSDT CFEF7000, 41AA (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: FACS CFE9C000, 0040 [ 0.000000] ACPI: APIC CFEF6000, 0078 (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: WDDT CFEF5000, 0040 (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: MCFG CFEF4000, 003C (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: ASF! CFEF3000, 00A6 (r32 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: HPET CFEF2000, 0038 (r1 INTEL DG965SS 6B7 MSFT 1000013) [ 0.000000] ACPI: SSDT CFE9A000, 020C (r1 INTEL CpuPm 6B7 MSFT 1000013) [ 0.000000] ACPI: SSDT CFE99000, 0175 (r1 INTEL Cpu0Ist 6B7 MSFT 1000013) [ 0.000000] ACPI: SSDT CFE98000, 0175 (r1 INTEL Cpu1Ist 6B7 MSFT 1000013) [ 0.000000] ACPI: SSDT CFE97000, 0175 (r1 INTEL Cpu2Ist 6B7 MSFT 1000013) [ 0.000000] ACPI: SSDT CFE96000, 0175 (r1 INTEL Cpu3Ist 6B7 MSFT 1000013) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1219200 [ 0.000000] Kernel command line: root=/dev/sdb2 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2397.650 MHz processor. [ 913.024465] Console: colour VGA+ 80x25 [ 913.024467] console [tty0] enabled [ 913.028691] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 913.028948] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 913.235970] Memory: 4080296k/4915200k available (1973k kernel code, 45420k reserved, 804k data, 212k init, 3209412k highmem) [ 913.236078] virtual kernel memory layout: [ 913.236078] fixmap : 0xffe15000 - 0xfffff000 (1960 kB) [ 913.236079] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 913.236080] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) [ 913.236080] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 913.236081] .init : 0xc03bd000 - 0xc03f2000 ( 212 kB) [ 913.236082] .data : 0xc02ed621 - 0xc03b662c ( 804 kB) [ 913.236083] .text : 0xc0100000 - 0xc02ed621 (1973 kB) [ 913.236581] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 913.236889] hpet clockevent registered [ 913.296879] Calibrating delay using timer specific routine.. 4797.85 BogoMIPS (lpj=2398926) [ 913.297049] Mount-cache hash table entries: 512 [ 913.297205] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 913.297210] monitor/mwait feature present. [ 913.297272] using mwait in idle threads. [ 913.297336] CPU: L1 I cache: 32K, L1 D cache: 32K [ 913.297423] CPU: L2 cache: 4096K [ 913.297485] CPU: Physical Processor ID: 0 [ 913.297547] CPU: Processor Core ID: 0 [ 913.297609] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 913.297614] Intel machine check architecture supported. [ 913.297678] Intel machine check reporting enabled on CPU#0. [ 913.297744] Compat vDSO mapped to ffffe000. [ 913.297813] Checking 'hlt' instruction... OK. [ 913.301141] SMP alternatives: switching to UP code [ 913.301707] ACPI: Core revision 20070126 [ 913.303295] Parsing all Control Methods: [ 913.303386] Table [DSDT](id 0001) - 610 Objects with 62 Devices 154 Methods 38 Regions [ 913.303584] Parsing all Control Methods: [ 913.303668] Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions [ 913.303845] Parsing all Control Methods: [ 913.303935] Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 913.304111] Parsing all Control Methods: [ 913.304196] Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 913.304372] Parsing all Control Methods: [ 913.304457] Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 913.304633] Parsing all Control Methods: [ 913.304718] Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 913.304882] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired [ 913.305034] evxfevnt-0079 [00] enable : System is already in ACPI mode [ 913.305204] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 913.305327] SMP alternatives: switching to SMP code [ 913.305716] Booting processor 1/1 eip 3000 [ 913.316471] Initializing CPU#1 [ 913.375859] Calibrating delay using timer specific routine.. 4795.21 BogoMIPS (lpj=2397605) [ 913.375864] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 913.375868] monitor/mwait feature present. [ 913.375870] CPU: L1 I cache: 32K, L1 D cache: 32K [ 913.375872] CPU: L2 cache: 4096K [ 913.375873] CPU: Physical Processor ID: 0 [ 913.375874] CPU: Processor Core ID: 1 [ 913.375875] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 913.375879] Intel machine check architecture supported. [ 913.375881] Intel machine check reporting enabled on CPU#1. [ 913.376352] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 913.377072] Total of 2 processors activated (9593.06 BogoMIPS). [ 913.377272] ENABLING IO-APIC IRQs [ 913.377492] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 913.488940] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 913.509035] Brought up 2 CPUs [ 913.509110] CPU0 attaching sched-domain: [ 913.509112] domain 0: span 00000003 [ 913.509114] groups: 00000001 00000002 [ 913.509117] CPU1 attaching sched-domain: [ 913.509118] domain 0: span 00000003 [ 913.509119] groups: 00000002 00000001 [ 913.509271] net_namespace: 64 bytes [ 913.509628] NET: Registered protocol family 16 [ 913.509792] ACPI: bus type pci registered [ 913.509916] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved [ 913.509981] PCI: Not using MMCONFIG. [ 913.511409] PCI: Using configuration type 1 [ 913.511472] Setting up standard PCI resources [ 913.518201] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 913.518929] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 4 Runtime GPEs in this block [ 913.519084] ACPI: EC: Look up EC in DSDT [ 913.520342] Completing Region/Field/Buffer/Package initialization:........................................................................ [ 913.522738] Initialized 32/38 Regions 0/0 Fields 25/25 Buffers 15/35 Packages (649 nodes) [ 913.522896] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 913.523044] Executed 1 _INI methods requiring 0 _STA executions (examined 68 objects) [ 913.523214] ACPI: Interpreter enabled [ 913.523277] ACPI: (supports S0 S3 S5) [ 913.523418] ACPI: Using IOAPIC for interrupt routing [ 913.526824] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 913.527575] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 913.527641] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 913.528286] PCI: Transparent bridge - 0000:00:1e.0 [ 913.528413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 913.528682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 913.528886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 913.528971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 913.529058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 913.529143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 913.529228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 913.533684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.534152] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.534616] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.535082] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.535544] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.536010] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.536476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.536939] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 913.537429] Linux Plug and Play Support v0.97 (c) Adam Belay [ 913.537513] pnp: PnP ACPI init [ 913.537578] ACPI: bus type pnp registered [ 913.539581] pnp: PnP ACPI: found 11 devices [ 913.539644] ACPI: ACPI bus type pnp unregistered [ 913.539842] SCSI subsystem initialized [ 913.540688] libata version 3.00 loaded. [ 913.540752] PCI: Using ACPI for IRQ routing [ 913.540815] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 913.545099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 913.545274] hpet0: 3 64-bit timers, 14318180 Hz [ 913.546362] ACPI: RTC can wake from S4 [ 913.546913] Time: tsc clocksource has been installed. [ 913.549188] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 913.549266] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 913.549331] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 913.549397] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 913.549462] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 913.549528] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 913.549593] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 913.549659] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 913.549724] system 00:01: iomem range 0xc0000-0xdffff could not be reserved [ 913.549789] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 913.549860] system 00:06: ioport range 0x500-0x53f has been reserved [ 913.549924] system 00:06: ioport range 0x400-0x47f has been reserved [ 913.549989] system 00:06: ioport range 0x680-0x6ff has been reserved [ 913.580391] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 913.580490] PCI: Bridge: 0000:00:01.0 [ 913.580552] IO window: 2000-2fff [ 913.580615] MEM window: e0000000-e1ffffff [ 913.580678] PREFETCH window: d0000000-dfffffff [ 913.580742] PCI: Bridge: 0000:00:1c.0 [ 913.580804] IO window: disabled. [ 913.580867] MEM window: disabled. [ 913.580930] PREFETCH window: disabled. [ 913.580994] PCI: Bridge: 0000:00:1c.1 [ 913.581056] IO window: 1000-1fff [ 913.581120] MEM window: e2000000-e20fffff [ 913.581186] PREFETCH window: disabled. [ 913.581250] PCI: Bridge: 0000:00:1c.2 [ 913.581311] IO window: disabled. [ 913.581374] MEM window: disabled. [ 913.581437] PREFETCH window: disabled. [ 913.581501] PCI: Bridge: 0000:00:1c.3 [ 913.581563] IO window: disabled. [ 913.581626] MEM window: disabled. [ 913.581689] PREFETCH window: disabled. [ 913.581753] PCI: Bridge: 0000:00:1c.4 [ 913.581814] IO window: disabled. [ 913.581878] MEM window: disabled. [ 913.581941] PREFETCH window: disabled. [ 913.582005] PCI: Bridge: 0000:00:1e.0 [ 913.582066] IO window: disabled. [ 913.582129] MEM window: disabled. [ 913.582193] PREFETCH window: disabled. [ 913.582266] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 913.582391] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 913.582405] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 913.582530] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 913.582544] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 913.582668] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 913.582682] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 913.582807] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 913.582821] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 913.582946] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 913.582960] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 913.583085] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 913.583093] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 913.583111] NET: Registered protocol family 2 [ 913.593426] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 913.593651] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 913.594045] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 913.594310] TCP: Hash tables configured (established 131072 bind 65536) [ 913.594380] TCP reno registered [ 913.597799] Machine check exception polling timer started. [ 913.598042] IA-32 Microcode Update Driver: v1.14a [ 913.598645] highmem bounce pool size: 64 pages [ 913.598709] Total HugeTLB memory allocated, 0 [ 913.598916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 913.599015] io scheduler noop registered [ 913.599085] io scheduler cfq registered (default) [ 913.599241] Boot video device is 0000:01:00.0 [ 913.599312] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 913.599336] assign_interrupt_mode Found MSI capability [ 913.599420] Allocate Port Service[0000:00:01.0:pcie00] [ 913.599478] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 913.599510] assign_interrupt_mode Found MSI capability [ 913.599596] Allocate Port Service[0000:00:1c.0:pcie00] [ 913.599621] Allocate Port Service[0000:00:1c.0:pcie02] [ 913.599682] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 913.599714] assign_interrupt_mode Found MSI capability [ 913.599800] Allocate Port Service[0000:00:1c.1:pcie00] [ 913.599824] Allocate Port Service[0000:00:1c.1:pcie02] [ 913.599885] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 913.599916] assign_interrupt_mode Found MSI capability [ 913.600002] Allocate Port Service[0000:00:1c.2:pcie00] [ 913.600031] Allocate Port Service[0000:00:1c.2:pcie02] [ 913.600092] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 913.600124] assign_interrupt_mode Found MSI capability [ 913.600210] Allocate Port Service[0000:00:1c.3:pcie00] [ 913.600237] Allocate Port Service[0000:00:1c.3:pcie02] [ 913.600298] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 913.600330] assign_interrupt_mode Found MSI capability [ 913.600418] Allocate Port Service[0000:00:1c.4:pcie00] [ 913.600442] Allocate Port Service[0000:00:1c.4:pcie02] [ 913.600668] input: Power Button (FF) as /class/input/input0 [ 913.600732] ACPI: Power Button (FF) [PWRF] [ 913.600842] input: Sleep Button (CM) as /class/input/input1 [ 913.600909] ACPI: Sleep Button (CM) [SLPB] [ 913.601165] ACPI: Processor [CPU0] (supports 8 throttling states) [ 913.601358] ACPI: Processor [CPU1] (supports 8 throttling states) [ 913.601481] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 913.601639] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 913.625999] hpet_resources: 0xfed00000 is busy [ 913.626017] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 913.626082] e100: Copyright(c) 1999-2006 Intel Corporation [ 913.626430] ahci 0000:00:1f.2: version 3.0 [ 913.626443] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 913.862179] Switched to high resolution mode on CPU 1 [ 913.862999] Switched to high resolution mode on CPU 0 [ 914.625810] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 914.625915] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 914.625986] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 914.626160] scsi0 : ahci [ 914.626268] scsi1 : ahci [ 914.626372] scsi2 : ahci [ 914.626475] scsi3 : ahci [ 914.626575] scsi4 : ahci [ 914.626676] scsi5 : ahci [ 914.626840] ata1: SATA max UDMA/133 abar m2048@0xe2125000 port 0xe2125100 irq 217 [ 914.626941] ata2: SATA max UDMA/133 abar m2048@0xe2125000 port 0xe2125180 irq 217 [ 914.627043] ata3: DUMMY [ 914.627103] ata4: DUMMY [ 914.627164] ata5: SATA max UDMA/133 abar m2048@0xe2125000 port 0xe2125300 irq 217 [ 914.627264] ata6: SATA max UDMA/133 abar m2048@0xe2125000 port 0xe2125380 irq 217 [ 915.082777] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 915.123256] ata1.00: ATA-7: ST3200820AS, 3.AAE, max UDMA/133 [ 915.123325] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 915.181555] ata1.00: configured for UDMA/133 [ 915.636773] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 915.827870] ata2.00: ATA-7: ST3200820AS, 3.AAE, max UDMA/133 [ 915.827938] ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 915.886169] ata2.00: configured for UDMA/133 [ 916.188725] ata5: SATA link down (SStatus 0 SControl 300) [ 916.491711] ata6: SATA link down (SStatus 0 SControl 300) [ 916.491871] scsi 0:0:0:0: Direct-Access ATA ST3200820AS 3.AA PQ: 0 ANSI: 5 [ 916.492074] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 916.492147] sd 0:0:0:0: [sda] Write Protect is off [ 916.492210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 916.492222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 916.492355] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 916.492426] sd 0:0:0:0: [sda] Write Protect is off [ 916.492489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 916.492501] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 916.492602] sda: sda1 [ 916.512207] sd 0:0:0:0: [sda] Attached SCSI disk [ 916.512339] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 916.512479] scsi 1:0:0:0: Direct-Access ATA ST3200820AS 3.AA PQ: 0 ANSI: 5 [ 916.512653] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 916.512728] sd 1:0:0:0: [sdb] Write Protect is off [ 916.512792] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 916.512804] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 916.512931] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 916.513002] sd 1:0:0:0: [sdb] Write Protect is off [ 916.513065] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 916.513076] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 916.513177] sdb: sdb1 sdb2 sdb3 sdb4 [ 916.534084] sd 1:0:0:0: [sdb] Attached SCSI disk [ 916.534194] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 916.534365] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 916.534508] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 916.534531] scsi6 : pata_marvell [ 916.534636] scsi7 : pata_marvell [ 916.534735] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17 [ 916.534800] ata8: DUMMY [ 916.534874] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 [ 916.840052] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66 [ 916.997049] ata7.00: configured for UDMA/66 [ 917.000509] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5 [ 917.017987] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 917.018092] Uniform CD-ROM driver Revision: 3.20 [ 917.018240] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 917.018290] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 917.018480] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 917.018545] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 917.021497] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 917.021563] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 917.021687] mice: PS/2 mouse device common for all mice [ 917.201244] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 917.842093] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [ 917.851529] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460) [ 917.851679] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 917.851757] iTCO_vendor_support: vendor-support=0 [ 917.852616] TCP cubic registered [ 917.852683] NET: Registered protocol family 1 [ 917.852752] NET: Registered protocol family 17 [ 917.852817] Using IPI No-Shortcut mode [ 917.852961] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 917.853025] EDD information not available. [ 917.859340] EXT3-fs: INFO: recovery required on readonly filesystem. [ 917.859405] EXT3-fs: write access will be enabled during recovery. [ 927.943094] kjournald starting. Commit interval 5 seconds [ 927.943103] EXT3-fs: recovery complete. [ 927.943366] EXT3-fs: mounted filesystem with ordered data mode. [ 927.943445] VFS: Mounted root (ext3 filesystem) readonly. [ 927.943595] Freeing unused kernel memory: 212k freed [ 930.400316] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 930.400318] Copyright (c) 1999-2006 Intel Corporation. [ 930.400364] PCI: Enabling device 0000:00:19.0 (0000 -> 0003) [ 930.400371] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 930.400382] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 930.417964] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:01:c8:f4 [ 930.493359] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 930.563002] usbcore: registered new interface driver usbfs [ 930.563022] usbcore: registered new interface driver hub [ 930.563484] usbcore: registered new device driver usb [ 930.565150] USB Universal Host Controller Interface driver v3.0 [ 930.565189] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 930.565196] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 930.565199] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 930.565325] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 930.565349] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0 [ 930.565442] usb usb1: configuration #1 chosen from 1 choice [ 930.565460] hub 1-0:1.0: USB hub found [ 930.565465] hub 1-0:1.0: 2 ports detected [ 930.666399] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 930.666407] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 930.666410] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 930.666428] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 930.666451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0 [ 930.666536] usb usb2: configuration #1 chosen from 1 choice [ 930.666557] hub 2-0:1.0: USB hub found [ 930.666561] hub 2-0:1.0: 2 ports detected [ 930.739683] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 930.739775] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 930.740489] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 930.767183] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 [ 930.767193] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 930.767197] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 930.767223] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 930.767248] uhci_hcd 0000:00:1d.0: irq 22, io base 0x00003080 [ 930.767361] usb usb3: configuration #1 chosen from 1 choice [ 930.767380] hub 3-0:1.0: USB hub found [ 930.767383] hub 3-0:1.0: 2 ports detected [ 930.868177] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 930.868185] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 930.868189] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 930.868212] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 930.868236] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 930.868360] usb usb4: configuration #1 chosen from 1 choice [ 930.868379] hub 4-0:1.0: USB hub found [ 930.868383] hub 4-0:1.0: 2 ports detected [ 930.969200] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 930.969207] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 930.969211] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 930.969234] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 930.969257] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 930.969379] usb usb5: configuration #1 chosen from 1 choice [ 930.969397] hub 5-0:1.0: USB hub found [ 930.969401] hub 5-0:1.0: 2 ports detected [ 931.070374] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 931.070382] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 931.070385] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 931.070403] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 931.074312] ehci_hcd 0000:00:1a.7: debug port 1 [ 931.074317] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 931.074320] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe2125c00 [ 931.084042] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 931.084150] usb usb6: configuration #1 chosen from 1 choice [ 931.084177] hub 6-0:1.0: USB hub found [ 931.084184] hub 6-0:1.0: 4 ports detected [ 931.184152] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 [ 931.184164] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 931.184168] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 931.184195] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 931.185275] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 931.188084] ehci_hcd 0000:00:1d.7: debug port 1 [ 931.188088] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 931.188093] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xe2125800 [ 931.197036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 931.197152] usb usb7: configuration #1 chosen from 1 choice [ 931.197179] hub 7-0:1.0: USB hub found [ 931.197185] hub 7-0:1.0: 6 ports detected [ 931.765036] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 931.909140] usb 4-2: configuration #1 chosen from 1 choice [ 933.665910] input: HID 0566:3107 as /class/input/input3 [ 933.673942] input: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:1d.1-2 [ 933.694753] input: HID 0566:3107 as /class/input/input4 [ 933.700939] input: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:1d.1-2 [ 933.700954] usbcore: registered new interface driver usbhid [ 933.700958] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 934.920147] EXT3 FS on sdb2, internal journal [ 935.231055] tun: Universal TUN/TAP device driver, 1.6 [ 935.231057] tun: (C) 1999-2004 Max Krasnyansky [ 935.412556] kjournald starting. Commit interval 5 seconds [ 935.412684] EXT3 FS on sdb1, internal journal [ 935.412687] EXT3-fs: mounted filesystem with ordered data mode. [ 935.467253] Adding 996020k swap on /dev/sdb4. Priority:-1 extents:1 across:996020k [ 940.280929] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 940.280933] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 943.829045] Bridge firewalling registered [ 943.829357] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 943.830244] device eth0 entered promiscuous mode [ 943.880128] br0: port 1(eth0) entering learning state [ 958.875347] br0: topology change detected, propagating [ 958.875351] br0: port 1(eth0) entering forwarding state